Parameters: the average molecular weight: 236.38 (according to 1995 international relative atomic mass), Appearance: white crystals, melting point: 51 ~ 53 ℃, boiling point: 315 ℃, refractive index: 1.5633 (20 ℃), specific gravity: 1.049 
 Product Description: High lubricant 
 Consequent has good thermal stability, aging resistance, mobility, do lubricants; because of the radiation, can withstand a wide range of temperature change, and for jet aircraft and rocket engine lubricants. For example, when the value is higher than jet aircraft, Mach 2, the ram air temperature rises, you need to have a lasting and stable nature of high temperature and special lubricants; also can be used for lubricating oil additives and radiation material. 
 Can be used for plastics and rubber, such as PVC, PP, PE (HDPE, LDPE, LLDPE) and so on. Such as adding three acetate can replace TPP in; for rigid PVC transparent products and polyethylene blown film, etc., good compatibility and strong internal lubrication, and significant role to promote melting, and can lower melt viscosity, processing temperature, increase the uniformity of plastics can be used as DOP, ACR, MBS alternative or complementary parts plasticizer; overall performance is superior to DOP, ACR, MBS; when adding less than 3 phr does not affect the transparency, impact strength of PVC and can improve. In addition, the polyolefin filled masterbatch, plastic melting time can be shortened to reduce the melt viscosity, improve melt flow and dispersion, to improve resin processing performance. The process is superior to low molecular weight PE wax lubrication in the resin by adding 0.5 parts α-MS ring dimer can reduce the main motor current, saving energy. Under the same conditions, can increase the amount of HDPE extruded 1 / 3 and room temperature impact resistance and improved surface finish products, transparency. Filled polyolefin masterbatch in polyethylene blow molding, granulation and film, polypropylene and polyvinyl chloride processing process, not only can improve the rheological properties, and can serve to increase the filler filling ratio, a lower processing costs and improve The role of these mechanical properties.